E3 ODE PRO Installation Bedienungsanleitung

E3 ODE PRO ist die beste ODE  auf der Welt für PS3. No restart, No eject. einfaches Upgrade und einfache Bedienung.
E3 ODE PRO unterstützt alle Slim Konsole Inkl 2xxx, 3xxx und 4XXX.
Wir empfehlen dem Spieler, aktualisieren Sie Ihre PS3-Konsole auf die neueste Firmware vor der Installation von E3 ODE PRO.
Installation der ODE E3 PRO ist schnell und bequem .

Installation auf SLIM und SUPER SLIM Modelle:( CECH 25xx. CECH 3xxx )

Carefully remove the resistors in the SATA signals area highlighted in the red circle in
the pictures below, for your respective console model, using a fine tip low power soldering iron. Please take absolute care when doing so, as these traces are essential for the console and ODE
to function:
25XX JSD-001 Mainboard anzeigen hier:

Once you have removed the resistors from the SATA lines and placed the solder board on top of your Motherboard in alignment with solder pads, it should look

something like this:

Once you have soldered the solder board to your console Motherboard, it should look

similar to the image below: 

25xx/3xxx shown here:

Then insert the 24 pin FFC LVDS cable (Marked as F the table above) between solder board on the ODE and 24 pin FFC LVDS connector on the solder board which you

soldered to the console motherboard. 

25xx/3xxx shown here:

Route the FFC cable out of the shielding as shown: 

25xx/3xxx shown here:

Relevant connector on E3 ODE PRO shown:

Disconnect the power cable between the console power supply and the console motherboard. Replace the cable with the correct type which has connector matching

that of your console. Insert the 4 pin low profile connector to your E3 ODE PRO board

connecter marked power as shown here

(note that the connector is top down press fit, not slide in) Kindly, note carefully the

orientation and direction of the cable, failure to do so could cause damage or malfunction: 25xx/3xxx shown:

Disconnect the 6PIN eject cable between the console motherboard and the BD drive. Replace the cable with the correct type which has connector matching that of your console. 

25xx/3xxx shown and install on console 

Please note don’t mix the text 6PIN cable and NO text 6PIN cable

You can now connect the 7PIN FFC from E3 mainboard to E3 USB STICK

The E3 ODE PRO should be positioned inside the console as shown

(CECH25XX/3XXX): Please adhere the double sided adhesive E3 ODE PRO between metal casing of drive and

bottom of E3 ODE PRO main board to act as an insulating shield.

You can now re-assemble your console and get ready to play games.

Mehr Ihfos über CECH4xxxx:

 E3 ODE PRO Installation Manual

E3 ODE PRO Test